Releasing the electric coolant pump and coolant hoses from the front axle support

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.

Release the coolant hose (1) from holders (2) on front subframe.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The following step(s) must be performed if the specified component(s) is/are installed.
Release the screws (1) from the holder for the electric coolant pump (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Position the holder for the electric coolant pump (1) above the stabilizer (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Release the screws (1) from the holder for the electric coolant pump (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Position the holder for the electric coolant pump (1) above the anti-roll bar (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Release the coolant hoses (1) from the holders (2) from the front axle support.

Courtesy of BMW OF NORTH AMERICA, INC.
Release the holder (1) on the right side on the front axle support (2).

Courtesy of BMW OF NORTH AMERICA, INC.