Moving the hood to the service position
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.
Precondition
Engine compartment lid is open.
CAUTION:
Shutting hood or trunk lid.
Injury hazard!
Injury hazard!
- Support the hood/tailgate in the fully open position using a suitable device.
NOTE:
The steps shown on one side must be performed on both sides.
- Lift the clamp (3) slightly in arrow direction with a screwdriver.
- Loosen ball socket (1) from ball pin (2).NOTE: TECHNICAL INFORMATION
Conduct the following operation with the assistance of a second person. - Remove the support of the hood and open the hood further.
- Place the special tool 0 493 200 (51 2 160) (3) over the gas pressure spring (1).
- Attach special tool 0 493 200 (51 2 160) (3) to the ball hub (2) and engage with force.