Install the cylinder head cover acoustic cover

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.

Carefully insert the acoustic cover (2) in arrow direction and install it.
Check the clip (1) for damage and replace if necessary.
Secure the clip (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Feed in and position acoustic cover (2) at ball hub (3).

Tighten down screw (1).

TIGHTENING TORQUES SPECIFICATION

Acoustic cover (side) to cylinder head cover
TS6 x 20	Tightening torque	6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Secure the clip (1).

Courtesy of BMW OF NORTH AMERICA, INC.