Install bearing bracket
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.
- Check sealing ring (1), replace if necessary.
Parts: Sealing ring
- Coat the sealing ring (1) with front axle differential oil.
- Position the bearing bracket (2) at the engine oil pan.
- Tighten down screws (1).
TIGHTENING TORQUES SPECIFICATION
| Bearing bracket to engine oil pan. | ||
|---|---|---|
| M8 | Tightening torque | 19 Nm |