Fasten the positive battery cable on the power distribution in front
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Working on 12V electrical system.
Risk of short circuits! Risk of fire!
Risk of short circuits! Risk of fire!
- Make sure that there is no charger connected to the jump start terminal in the engine compartment.
- Detach battery ground lead from battery.
- For auxiliary batteries: Detach battery minus cables from all auxiliary batteries.
- Position the positive battery cable.
- Tighten nuts (2).TIGHTENING TORQUES SPECIFICATION
Positive battery cable Positive pole screw tightening torque 15 Nm - Feed in the cover (1) in a downwards direction.
- Engage the cover (1) in the detents (2).