LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2021 >> 840i 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Maintenance And General Information -- Repair (G02)) >> 00 00 General Maintenance >> 00 00 252 Engine oil service (X4 xDrive30i 2022-2023) >> Removing the oil filler cap

Removing the oil filler cap

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2025 BMW X4, 2024 BMW X4, 2023 BMW X4, 2022 BMW X4, and 2021 BMW X4. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Hot fluids. 
Risk of scalding! 
  • Conduct all work in the vehicle wearing appropriate personal protective equipment only.
WARNING: Hot surfaces. 
Risk of burning! 
  • Perform all work only on components that have cooled down.
NOTE: RISK OF DAMAGE 
Contaminant or foreign body. 
Contamination can result in malfunctions, loss of function or leaks. 
  • Adhere to the utmost cleanliness.
  • Protect components from contamination e.g. by covering.
  • Close off line connections with seal plugs.
NOTE: RISK OF DAMAGE 
Engine damage caused by excessively filling the engine with motor oil. 
Filling an excessive quantity of motor oil may cause engine damage. 
  • Observe the exact motor oil filling capacity.
  • Allow engine oil to drip off when draining.
NOTE: TECHNICAL INFORMATION 
Make sure the vehicle is operating temperature for engine oil service (engine oil temperature > 70°C).
NOTE: TECHNICAL INFORMATION 
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.

Preliminary work 

G14190963Courtesy of BMW OF NORTH AMERICA, INC.