2211 Engine Mounting
2211 TIGHTENING TORQUE OVERVIEW
| Engine mount to engine support bracket | ||
| M12 | tightening torque | 100 Nm |
| Engine mount to front axle support | ||
| M8 | tightening torque | 19 Nm |
| Engine support bracket on the engine | ||
| M10 | Tightening torque | 38 Nm |
| Mounting bracket on eDrive motor | ||
| M10x55 Replace screw. |
Snug torque | 56 Nm |
| Angle of rotation | 90° | |
| Radial bearing on electric drive unit | ||
| M14x1.5x115 Replace screw. |
Snug torque | 165 Nm |
| Angle of rotation | 90° | |