Installing the instrument cluster (KOMBI)

• Connect the plug connector (1) to the instrument cluster (KOMBI) (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Guide in the instrument cluster (KOMBI) (2) and snap into the detents.
• Tighten down screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Instrument cluster (KOMBI) to support
  Screw	tightening torque	1.8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING STEERING COLUMN SHROUD LOWER SECTION .
• Refer to FITTING STEERING COLUMN SHROUD UPPER SECTION .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .