Replacement: Remounting the door lock

Detach the linkage (1) from the door lock (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Unclip the Bowden cable (1) on the door lock (3).
Detach the Bowden cable nipple (2) on the door lock (3).

Courtesy of BMW OF NORTH AMERICA, INC.
On equipment specification with soft-close automatic:
Loosen cover (1) on locks (2).
Remove the cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.
On equipment specification with soft-close automatic:
Detach Bowden cable (1) from door lock (2).
Remove the soft-close motor (3).

Courtesy of BMW OF NORTH AMERICA, INC.
On equipment specification with soft-close automatic:
Attach the Bowden cable (1) from the Automatic Soft Close drive (3) on the door lock (2).

Courtesy of BMW OF NORTH AMERICA, INC.
On equipment specification with soft-close automatic:
Install cover (1) and clip in the detents (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Attach the Bowden cable nipple (2) on the door lock (3).
Clip in the Bowden cable (1) on the door lock (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Attach the linkage (1) in the door lock (2).

Courtesy of BMW OF NORTH AMERICA, INC.