Raise rear axle

Carefully lift the rear axle support and position it on the body.

Courtesy of BMW OF NORTH AMERICA, INC.

Securing the ground cable on the rear axle support

NOTE: The following step(s) must be performed if the listed component(s) is/are installed.
Position ground cable (2) on rear axle support.

Tighten down screw (1) .

TIGHTENING TORQUES SPECIFICATION

HSR actuator ground cable on rear axle support
M6	tightening torque	12 Nm

G15664785

Courtesy of BMW OF NORTH AMERICA, INC.