Removing windshield panel trim
Precondition
- Battery charger connected.
NOTE:
TECHNICAL INFORMATION
During the disassembly, be sure to remove parts that have broken off of the components.
During the disassembly, be sure to remove parts that have broken off of the components.
CAUTION:
Folding up of convertible top through loss of pressure in hydraulic cylinders
.
Injury hazard! Injury hazard by trapping!
Injury hazard! Injury hazard by trapping!
- When carrying out all repair work, secure soft top and soft top compartment lid with a suitable support tool against collapsing. Ensure soft top is supported in the middle.
- Place the convertible top in the half-open position.
- Loosen screws (1).
- Loosen screws (2).
- Release the windshield panel trim (3) at the clips (4) and remove it.
- Make sure the centering (5) is not damaged during the removal.