Preparing the roof frame

Clean the roof frame in the area (1) using a cleaning agent R2.

TECHNICAL DATA SPECIFICATION

Air drying time after cleaning
	Cleaning agent R2	5 min

CONSUMABLE SPECIFICATION

Cleaning agent R2

500 ml

83190417324

Courtesy of BMW OF NORTH AMERICA, INC.

Cutting back the adhesive bead on the body

NOTE: TECHNICAL INFORMATION
Do not cut back the residual bead until shortly before bonding.

Position folded scraper (2) as shown.
Cut back adhesive bead (1) on body (3) to a thickness of approx. 0.5 mm.

Courtesy of BMW OF NORTH AMERICA, INC.