5111 Bumper, Front
5111 TIGHTENING TORQUE OVERVIEW
| Bottom bumper bracket on the front subframe. | ||
| M8x100 Replace screws. |
Tightening torque | 19 Nm |
| Car registration number | ||
| Screw TS 5x13 | Tightening torque | 0.7 Nm |
| Cross member cover on support | ||
| Thermoplastic hexagon screw | Tightening torque | 3 Nm |
| Deformation element, bottom to front axle support, | ||
| Hexagon screw M8x75 | Tightening torque | 19 Nm |
| Deformation element to engine mount | ||
| Hexagon screw M12 Replace screw. |
Tightening torque | 100 Nm |
| Angle of rotation | 180° | |
| Front bumper panel to fender | ||
| Thermoplastic screw 5x35 | Tightening torque | 3 Nm |
| Front bumper panel to undershield | ||
| Thermoplastic hexagon screw | tightening torque | 3 Nm |
| Front spoiler to bumper cover | ||
| Hexagon screw | Tightening torque | 2 Nm |
| License plate baseplate | ||
| Screw TS 5x16 | Tightening torque | 0.7 Nm |
| Support to support | ||
| Hexagon screw M6x20 | Tightening torque | 8 Nm |
| Support to top deformation element | ||
| Hexagon screw M8x25 | Tightening torque | 19 Nm |
| Vertical connection to deformation element | ||
| Flat-head screw M6x20 | Tightening torque | 12 Nm |