Fitting the emblem at the rear

Check 

• Check the guide pins (1) and nozzles (2) for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» The guide pins (1) are damaged.

Measure

• Replace the emblem.

  Parts:  Emblem

Result 

» The nozzles (2) are damaged.

Measure

• Replace the nozzles (2).

  Parts:  Grommets

• Coat the guide pins (2) of the emblem (1) with lubricant.

• Insert and press the emblem (1) with the guide pins (2) in the nozzles.

Courtesy of BMW OF NORTH AMERICA, INC.