Install the rear bumper trim
NOTE:
Perform the steps on the right and left side.
Install the rear bumper trim
NOTE:
Perform the steps on the right and left side.
- Clip in the rear bumper trim (1) into all marked detents (2).
- Clip in the detents (2).
- Tighten down screw (1).
TIGHTENING TORQUES SPECIFICATION
| Rear bumper trim to bumper cover | ||
|---|---|---|
| Hexagon screw for thermoplastic | tightening torque | 2.6 Nm |
Follow-up work
- Refer to INSTALLING THE REAR DIFFUSER .