5164 Front Panel, Front End
5164 TIGHTENING TORQUE OVERVIEW
| Air duct frame | ||
| Screw | tightening torque | 2.6 Nm |
| Air flap control on front end | ||
| Oval-head screw with spring washer | Tightening torque | 4 Nm |
| Flat-head screw M6x35 | Tightening torque | 4 Nm |
| Front-end strut on wheel well | ||
| Hexagon screw Replace screw. |
Tightening torque | 56 Nm |
| Angle of rotation | 90° | |
| Front-end strut to cross connection | ||
| Hexagon screw Replace screw. |
Tightening torque | 28 Nm |
| Angle of rotation | 90° | |
| Lower air flap control on cross member cover | ||
| Hexagon screw for thermoplastic | Tightening torque | 3 Nm |
| Reinforcement strut on cross connection and bumper bracket | ||
| Oval-head screw M8 | tightening torque | 19 Nm |
| Support for top air flap control at the top of the lock | ||
| Combination clamping screw with ISA | Tightening torque | 8 Nm |
| Top cross connection to rear top cross-connection | ||
| Combination clamping screw with ISA | Tightening torque | 8 Nm |
| Top rear connection to body | ||
| Torx screw M8x30 | tightening torque | 19 Nm |
| Hexagon screw M8x20 | tightening torque | 19 Nm |