5112 Bumper, Rear
5112 TIGHTENING TORQUE OVERVIEW
| Bumper cover to guide, middle | ||
| Oval-head screw for thermoplastic | tightening torque | 3 Nm |
| Diffuser to heat insulation for rear silencer | ||
| Plastic nut with flange | Tightening torque | 3 Nm |
| Diffuser to rear bumper | ||
| Plastic hexagon screw | Tightening torque | 3 Nm |
| Exhaust cover to adapter | ||
| Hexagon screw for thermoplastic | Tightening torque | 3 Nm |
| Guide for rear bumper, lateral to body | ||
| Nut and washer assembly with paint scrape groove | Tightening torque | 4.6 Nm |
| Guide for rear bumper at center on body | ||
| Nut and washer assembly with paint scrape groove | Tightening torque | 5 Nm |
| Hexagon screw for thermoplastic | Tightening torque | 3 Nm |
| Rear bumper trim to bumper cover | ||
| Hexagon screw for thermoplastic | tightening torque | 2.6 Nm |
| Rear bumper trim to undershield | ||
| Screw | tightening torque | 3 Nm |
| Rear mount to bumper cover | ||
| Hexagon screw for thermoplastic | Tightening torque | 3 Nm |
| Rear silencer on support | ||
| M8 hexagon nut | Tightening torque | 19 Nm |
| Rear undershield to cargo area floor | ||
| Plastic nut with flange | Tightening torque | 2.3 Nm |
| Rear wheel arch cover to body | ||
| Plastic nut with flange | Tightening torque | 2 Nm |
| Rear wheel arch cover to rear bumper cover | ||
| Plastic hexagon screw | Tightening torque | 3 Nm |
| Support on impact plate | ||
| hexagon nut M12 | Tightening torque | 108 Nm |