Removing the front emblem
NOTE:
RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
Careless handling of tools and sharp-edged components .
Scratches, surface damage .
- Protect working area.
- Handle tools and components carefully.
- Mask off the working area with plastic adhesive tape to prevent paint damage.
- Heat the emblem (1) carefully with a hot air blower and release it from the adhesive strip with the special tool 0 496 571 (00 9 327) .
TECHNICAL DATA SPECIFICATION
| Heating using hot air blower | |
|---|---|
| Surface temperature | 40°C... 50°C |
- Carefully lever out the badge (1) from the grommets (2) and remove it.
- Remove the adhesive residue from the hood.
CONSUMABLE SPECIFICATION
| Adhesive remover | 1 l, Can | 83110009712 |