Install Outer Wheel Arch Section With Reinforcement
NOTE:
TECHNICAL INFORMATION
Use only approved spot welder for repair.
For additional information see: 41 00... Workshop equipment
Use only approved spot welder for repair.
For additional information see: 41 00... Workshop equipment
- Install new part (1) and weld in the area.
Avoid too much heat input on the adjacent adhesive area (2).
- Weld the new part in the areas (1).
In this process, avoid excessively high heat input in the adjacent adhesive area (arrows).
- Install the new part and weld it in areas (1).NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Installation of a cavity sealing (not expanding) - Apply sealant D1 to the inner cavity sealing (1). Install the inner cavity sealing in the new part (2).CONSUMABLE SPECIFICATION
Sealant D1 (seam sealing) 310ml 83422409985 - Apply sealant D1 to the inner cavity sealing (1).
- Install the new part and reinforcement plate (2) and weld them in area (3).
- Apply the sealant to the outer cavity sealing (4). Install the outer cavity sealing (4).