Remove rear entrance cover strip

NOTE: RISK OF DAMAGE
Bending of plastic components .
Application of too much force can lead to bending of plastic components .

Place special tool directly beside the mounting clip.
Continue unclipping the part without using the tool if possible.

Release the rear seat (1) in area (2) in upward direction from the detents.

Courtesy of BMW OF NORTH AMERICA, INC.
Raise the rear seat (1) slightly.
Release the rear door sill cover strip (2) upward from the clips (3) and remove.

G15651310

Courtesy of BMW OF NORTH AMERICA, INC.