Installing the head restraint

• Position the head restraint (2)  correctly at the rear seat frame (3)  .
• Tighten the screws (1)  .
  TIGHTENING TORQUES SPECIFICATION
  
  

  Head restraint to backrest frame
  Screw Replace screw	tightening torque	18 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING BACKREST COVERING WITH CUSHION FOR REAR SEAT .
• Refer to INSTALLING THE CENTER REAR SEAT BACKREST .
• Refer to INSTALLING THE LEFT AND CENTER REAR SEAT BACKREST .
• Refer to INSTALLING BACKREST SIDE SECTION .
• Refer to INSTALLING THE REAR SEAT .