Install outer cover on front seat

Check the detents (1) for damage. If necessary, replace the cover (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Connect the connector (1) and clip into the cable bracket if applicable.

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the cover panel (2) in the area (4) and position.
Engage cover panel (2) at the detents (3).

Tighten down screw (1).

TIGHTENING TORQUES SPECIFICATION

Seat trim to seat frame
Sheet metal screw	tightening torque	2.5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.