Install the seat belt finisher strip

Check 

• Check the clip (1) for damage and replace if necessary.
• Check guide (3) and detents (4) for damage.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

The guide (3) is damaged.

Measure

• Replace the seat belt finisher strip (2).

  Parts:  cover, exit, seat belt

Result 

Detents (4) are damaged.

Measure

• Replace the seat belt finisher strip (2).

  Parts:  cover, exit, seat belt

• Feed the safety belt (2) into the seat belt finisher strip (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Feed in the belt feed (1) at the safety belt.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install the belt feed (2).
• Clip in the clip (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the seat belt finisher strip (1) in the guide (4) to the rear.
• Clip the seat belt finisher strip (1) into the detentes (3) and the clip (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the screw (1) at the end lining of the seat belt (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING REAR TRIM PANEL .
• Refer to INSTALLING THE INNER DOOR SILL COVER STRIP .
• Refer to INSTALLING THE REAR SEAT .