Replacing the tail light on the trunk lid

• Connect and lock the connector (2) and position the tail light correctly on the tailgate (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace screws (1).

  Parts:  Screws

• Tighten down screws (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Tail light at trunk lid
  Oval-head screw M5x14 Replace screws.	Tightening torque	5.5 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE WATER CHANNEL ON THE TAIL LIGHT .
• Refer to INSTALLING THE TAILGATE TRIM PANEL .
• Refer to INSTALLING THE POWER TAILGATE SWITCH .
• Refer to Installing trunk compartment light on trunk lid. Refer to 63 21 283 REMOVING AND INSTALLING BOTH TAIL LIGHTS OF SIDE PANEL (840I CONVERTIBLE, 840I XDRIVE CONVERTIBLE, M850I XDRIVE CONVERTIBLE) .