5114 Plates, Labels, Adhesive Films Technical Data
5114 TECHNICAL DATA OVERVIEW
| Heating using hot air blower | ||
| Surface temperature | 40°C... 50°C | |
| Left model designation to trunk lid | ||
| Dimension B from lower edge of trunk lid | 48 mm | |
| Left model designation to trunk lid | ||
| Dimension A from corner of the trunk lid | 71 mm | |
| Rear spoiler distance | ||
| Dimension A must be measured from the outer edge of the adhesive tape (1). | 230 mm | |
| Rear spoiler distance | ||
| Dimension B must be measured as shown. | 360 mm | |
| Right model designation to trunk lid | ||
| Dimension B from lower edge of trunk lid | 47 mm | |
| Right model designation to trunk lid | ||
| Dimension A from corner of the trunk lid | 64 mm | |