4100 Body Technical Data

4100 TECHNICAL DATA OVERVIEW

Air drying time after the order
	Betawipe 4800	2 min
Filler S1
	Processing time 20°C	90 min
	Processing time 30°C	60 min
	Curing time 60°C	60 min
	Storage	15°C... 25°C
	Shelf life (observe expiration date on the cartridge)	12 Months
Gap dimension front door to door sill trim panel
1 front door; 2 door sill trim panel Courtesy of BMW OF NORTH AMERICA, INC.	a	3.5 ^+1.2_-1.2 mm
	b	13.3 ^+0.3_-1.3 mm
Gap dimension front door to rear quarter panel
1 Front door; 2 rear quarter panel Courtesy of BMW OF NORTH AMERICA, INC.	a	3.8 ⁺¹_-1 mm
	b	0 ^+1.3_-0.3 mm
Gap dimension hood to headlight
1 hood; 2 headlight Courtesy of BMW OF NORTH AMERICA, INC.	a	6.4 ^+1.8_-1.8 mm
Gap dimension hood to ornamental grille surround
1 hood; 2 ornamental grille surround Courtesy of BMW OF NORTH AMERICA, INC.	a	4.2 ⁺¹_-1 mm
	b	1.3 ^+1.5_-1.5 mm
Gap dimension hood to side panel
1 hood; 2 side panel Courtesy of BMW OF NORTH AMERICA, INC.	a	3.3 ⁺¹_-1 mm
	b	0.1 ^+1.6_-1.6 mm
Gap dimension rear quarter panel to trunk lid
1 rear quarter panel; 2 trunk lid Courtesy of BMW OF NORTH AMERICA, INC.	a	3.8 ^+1.2_-1.2 mm
	b	0.8 ^+1.4_-1.4 mm
Gap dimension rear window to roof outer skin
1 rear window; 2 roof outer skin Courtesy of BMW OF NORTH AMERICA, INC.	a	3.3 ^+1.3_-1.3 mm
	b	0.9 ⁺¹_-1.5 mm
Gap dimension side panel to A-pillar
1 side panel; 2 A-pillar Courtesy of BMW OF NORTH AMERICA, INC.	a	2.7 ^+1.1_-1.1 mm
	b	0 ^+1.1_-1.1 mm
Gap dimension side panel to front door
1 Side panel; 2 front door Courtesy of BMW OF NORTH AMERICA, INC.	a	3.8 ⁺¹_-1 mm
	b	0.8 ^+0.8_-0.8 mm
Gap dimension trunk lid to rear bumper panel
1 trunk lid; 2 rear bumper panel Courtesy of BMW OF NORTH AMERICA, INC.	a	4.3 ^+1.5_-1.5 mm
	b	0.4 ^+1.7_-1.7 mm
Gap dimension windshield to roof outer skin
1 windshield; 2 roof outer skin Courtesy of BMW OF NORTH AMERICA, INC.	a	4.3 ^+1.2_-1.2 mm
	b	0.9 ⁺¹_-1.5 mm