3610 Wheels (Two-Part Alloy) Technical Data
3610 WHEELS TWO-PART ALLOY WHEELS - TECHNICAL DATA SPECIFICATION
| Max. radial runout of tire Rim with tire |
max. mm | 1.3 |
| Max. axial runout or tire Rim with tire |
max. mm | 1.5 |
| Max. radial runout out rim | max. mm | 0.5 |
| Max. axial runout of rim | max. mm | 0.5 |
| Max. imbalance for each side (before balancing) |
max. g | 90 for clamp weights 120 for stick-on weights |
| Permissible residual imbalance for each side (after balancing) |
max. g | 4 |
| Elimination of imbalance: Up to 60 g with one weight or more than 60 g with two weights |