3100 General Front Axle Technical Data
3100 TECHNICAL DATA OVERVIEW
| Rear-wheel drive | ||
| Measured from center of wheel hub to lower edge of wheel well | Dimension A | 378 +10-10 mm |
| Ride height of front axle G08 LCI for standard suspension, rear-wheel drive | ||
| Ride height (A): Measured from bottom center of rim flange (1) to lower edge of wheel arch (2). | 18" wheel rim | 669 mm |
| 19" wheel rim | 682 mm | |
| 20" wheel rim | 694 mm | |
| 21" wheel rim | 707 mm | |
| Ride height of front axle G08 Standard suspension of rear wheel drive | ||
| Ride height (A): Measured from bottom center of rim flange (1) to lower edge of wheel arch (2). | 18" wheel rim | 669 mm |
| 19" wheel rim | 682 mm | |
| 20" wheel rim | 694 mm | |
| 21" wheel rim | 707 mm | |
| Ride height on front axle G15 rear-wheel drive | ||
| Ride height (A): Measured from bottom center of rim flange (1) to lower edge of wheel arch (2). | 17" wheel rim | 611 mm |
| 18" wheel rim | 623 mm | |
| 19" wheel rim | 636 mm | |
| 20" wheel rim | 648 mm | |
| Track width on front axle G08 of standard suspension for rear-wheel drive | ||
| Rim offset 22 | 1620 mm | |
| Rim offset 27 | 1610 mm | |
| Rim offset 30 | 1604 mm | |
| Rim offset 32 | 1600 mm | |
| Track width on front axle G15 rear-wheel drive | ||
| Rim offset 26 | 1628 mm | |
| Rim offset 27 | 1626 mm | |
| Rim offset 30 | 1620 mm | |
| Weight compensation when lowering or removing the front subframe | ||
| If the cargo area is empty: | 50 kg | |
| Weight compensation when removing the eDrive motor | ||
| If the cargo area is empty: | 120 kg | |
| WheelbaseG15 | ||
| 2822 mm | ||