LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2021 >> 840i 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Exterior Trim >> Technical Data -- (G14, G15, & G16) >> 17 Cooling System >> 1700 COOLANT TECHNICAL DATA (M850i coupe/convertible/Gran Coupe xDrive sedan)

1700 COOLANT TECHNICAL DATA (M850i coupe/convertible/Gran Coupe xDrive sedan)

1700 TECHNICAL DATA OVERVIEW

Coolant level 
  Overfill quantity of coolant (above the maximum mark) in the high-temperature expansion tank  + 200 ml
Overfill quantity of coolant (above the maximum mark) in the low-temperature expansion tank (if installed)  + 100 ml
Cooling system test pressure 
  Test pressure for cooling system (gauge pressure)  1.5 bar
High-temperature coolant circuit filling capacity 
  (with SA33T)  10 l
(without SA33T)  8.75 l
Low-temperature coolant circuit filling capacity 
    3.25 l
Opening pressure of coolant seal cover 
  Pressure relief valve opens when the pressure exceeds the ambient pressure.  min. 2.0 bar
Electric changeover valve must open at latest when the pressure is lower than the ambient pressure  max. 0.1 bar
Test conditions for coolant level 
  Coolant must be cooled down