Remove the knock sensors on the right
Preliminary work
- Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
- Refer to REMOVING THE COVER OF THE RIGHT DME CONTROL UNIT .
- Refer to REMOVING THE CONTROL UNIT BRACKET FOR CYLINDERS 1 TO 4 .
- Refer to REMOVING THE COVER FOR THE STEERING ASSEMBLY ON THE RIGHT .
- Refer to REMOVING THE UNDERBODY PROTECTION OF THE STEERING GEAR AND THRUST FIELD RESPECTIVELY .
- Refer to REMOVING THE STIFFENING PLATE .
Precondition
Ignition is switched off.
The vehicle battery is disconnected.
- Detach the clamp (1) from the intake plenum.
- Unlock connector (1) and disconnect it from the knock sensors.
- Loosen screws (3).
- Remove the knock sensors.