Installing camshaft position sensor of intake camshaft

• Replace sealing ring (1).

  Parts:  Sealing ring

  Courtesy of BMW OF NORTH AMERICA, INC.

• Thread in and install the camshaft position sensor of the intake camshaft (3).
• Tighten down screw (2).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Camshaft position sensor to cylinder head cover
  TS5x20	Tightening torque	4 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect and lock the connector (1).

  The connector (1) must engage audibly.

Follow-up work 

• Refer to INSTALLING ACOUSTIC COVER .