Removing the inner door sill cover strip

NOTE: RISK OF DAMAGE 
Bending of plastic components  .
Application of too much force can lead to bending of plastic components  .

• Place special tool directly beside the mounting clip.
• Continue unclipping the part without using the tool if possible.

• Unclip inside door sill cover strip with special tool  0 496 569 (00 9 325)  upwards from clamps (1) and  clips (2).

  Courtesy of BMW OF NORTH AMERICA, INC.

• If necessary, unclip clips (1) from floor panel (2) and attach to inside door sill cover strip.

Courtesy of BMW OF NORTH AMERICA, INC.