Installing tail light onto side panel at right

Installing the tail light on the side panel 

Check 

• Check the seal (1) for damage and replace if necessary.
• Check threaded inserts (2) for damage.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Result 

  » The threaded insert is damaged.

  Measure

  • Replace the rear light on the side panel.

  Parts:  Tail lamp

• Connect and lock connector (2)  of tail light (1) on the side panel.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install tail light (1) on the side panel.

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: To provide a better overview: Schematic diagram with partially hidden components.
• Tighten nuts (1).
  TIGHTENING TORQUES SPECIFICATION
  
  

  Side panel tail light to body
  hexagon nut M5	Tightening torque	3 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE RIGHT WATER CHANNEL COVER .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT (PARTIALLY REMOVED) .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING LUGGAGE COMPARTMENT FLOOR COVERING .