Replace the air flap control at the top

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Loosen screw (1).
Release acceleration sensor (2) forwards with detents (3) and remove.

Courtesy of BMW OF NORTH AMERICA, INC.
Replace the air flap control.
Parts: Automatic air flap control
Position acceleration sensor (2) at top on new air flap control and clip in with detents (3).
Tighten down screw (1).

TIGHTENING TORQUES SPECIFICATION

Acceleration sensor on upper air flap control
Flat-head screw M6x20	Tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.