Replacing the trim panel for the rear shelf

NOTE: The description is provided only at one component. The procedure is the same for all other components.

• Release the locks (1) and guide out the upper retaining strap cover (2).
• Replace the trim panel for the rear shelf.

  Parts:  Trim panel for the rear shelf

• Clip the upper retaining strap cover (2) into the trim panel for the rear shelf.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Release the plastic nut (1) and remove the belt holder (2).
• Insert the belt holder (2) into the trim panel for the rear shelf and fasten it with the plastic nut (1).

Courtesy of BMW OF NORTH AMERICA, INC.