Adjusting the eccentric shaft to the minimum lift (cylinder head removed)

• Adjust the eccentric shaft (3)  slowly to the minimum lift with the help of the servomotor using a standard Allen wrench (1)  with 4 mm  in arrow direction.
• Ensure that the marking (2)  on the eccentric shaft (3)  faces up.

Courtesy of BMW OF NORTH AMERICA, INC.

• Adjust the eccentric shaft (3)  slowly to the minimum lift with the help of the servomotor using a standard Allen wrench (1)  with 4 mm  in arrow direction.
• Ensure that the marking (2)  on the eccentric shaft (3)  faces up.

Courtesy of BMW OF NORTH AMERICA, INC.