Install the bearing screws for cylinders 1-4 and 8-8
NOTE:
TECHNICAL INFORMATION
Clean all threads with a screw tap.
Clean all threads with a screw tap.
- Install bearing screws (1)
and (2)
.TIGHTENING TORQUE SPECIFICATIONS
Bearing screws for M10 cylinders 1-4 M10
Clean the threads with a thread cutter.tightening torque 46 Nm TIGHTENING TORQUE SPECIFICATIONSTensioning rail bearing screw and guide rail, cyl. 5 to 8, to crankcase M8x1.25 Tightening torque 20 Nm