Installing the carpet at the rear seat box

• Place the carpet (2)  in the car.
• Make sure the carpet (2)  is positioned correctly at all adjacent parts.
• Clip in the ventilation grille (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE CENTER CONSOLE .
• Refer to INSTALLING THE CENTER STACK TRIM .
• Refer to INSTALLING THE FOOTWELL TRIM PANEL ON THE RIGHT .
• Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .
• Refer to INSTALLING THE FRONT STORAGE COMPARTMENT .
• Refer to INSTALLING THE CENTER ARMREST STORAGE COMPARTMENT .
• Refer to INSTALLING THE REAR STORAGE COMPARTMENT/DVD PLAYER .
• Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
• Refer to INSTALLING BOTH BOTTOM B-PILLAR TRIMS .
• Refer to PARTIALLY INSTALLING THE B-PILLAR TRIM PANELS AT THE TOP LEFT AND RIGHT .
• Refer to INSTALLING BOTH REAR DOOR SILL COVER STRIPS .
• Refer to INSTALLING BOTH FRONT DOOR SILL COVER STRIPS .
• Refer to installing both speaker trims on the central bass.
  NOTE: Description is for right component only. The procedure on the left side is identical.
  • Position the speaker trim (2) correctly.
  • Tighten the screws (1).

    Courtesy of BMW OF NORTH AMERICA, INC.

  • Insert the air duct (2) into the carpet (3).
  • Install expanding rivet (1).

    Courtesy of BMW OF NORTH AMERICA, INC.

  • Correctly position the speaker trim (1) and clip it into the carpet (2).

    Courtesy of BMW OF NORTH AMERICA, INC.

  • In equipment specifications with rail:  Correctly position the rail (2) and tighten the screws (1).

    Courtesy of BMW OF NORTH AMERICA, INC.

• Refer to INSTALLING BOTH FRONT SEATS .
• Refer to INSTALLING BOTH SEAT SURFACES .
• Refer to INSTALLING BOTH REAR SEATS .
• Refer to INSTALLING THE CENTRAL SEAT SURFACE .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .