Installing the rear outer wheel arch section

• Clean all bonding surfaces with cleaning agent R1.
• Apply adhesive to bonding surfaces.
  NOTE: TECHNICAL INFORMATION 
  When installing the new part, make sure that all bonding surfaces have sufficient adhesive.
• Install new part.
• In area (1), rivet the new part with blind rivet N3.
  NOTE: TECHNICAL INFORMATION 
  For additional information see: 41 00... Installation of a cavity sealing (not expanding)
• Apply sealant to new cavity acoustic baffle. Install cavity sealing (2).

Courtesy of BMW OF NORTH AMERICA, INC.