Connect the battery earth lead for the active steering

NOTE: TECHNICAL INFORMATION 
Disconnect and connect the battery at the battery terminals only. Do not disconnect at the connectors!

• Position the battery negative lead on the negative pole and tighten with the screw (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Active steering battery terminal
  M6	Tightening torque	6 Nm

• Close the protective cap (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Vehicles from version 07/2016:  If necessary, position the cover (2) and clip in the clips (1).

  The cover is an optional installation.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Push the auxiliary battery (2) to the left with the associated foam inlay.
• Insert the foam inlay (1) of the separator from the top down.

Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the separator (3).
• Position the retainer (2).
• Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Battery carrier on body (active steering)
Hexagon screw M6	tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.