Installing the low power distribution box

• Connect connector (3).
• Push the lock (2) downward.
• Clip in cable with holder (1).

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the power distribution box (2).
• Tighten plastic nuts (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten all nuts (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten the positive battery cable using the nut (1).

• Tighten the positive battery cables using the screws (2).

Courtesy of BMW OF NORTH AMERICA, INC.

• Connect all connectors (3).
• Clip in the cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .