Crimping of Nano MQS contacts (MQS) (all 7' series models 2016-2022)

Special tools required:

2 407 379
2 407 378
0 496 833
0 494 159
0 496 849
0 494 158

Order number: 83 30 2 407 379

NOTE: The storage location must be selected individually.

Courtesy of BMW OF NORTH AMERICA, INC.

Application of tool to strip off insulation

With the tool, cables with the following cross section can be stripped of their insulation:

0.13 mm² - 0.17 mm²
0.22 mm² - 0.50 mm²

The enclosed operating instructions include instructions for the use of the tool.

Courtesy of BMW OF NORTH AMERICA, INC.

Die-plate

Order number: 83 30 2 407 378

NOTE: Insert the matrix so that the BMW part number of the matrix and handle are facing the same way!
The tool set case is the storage location of the die-plate (83 30 0 496 833).
Correct operation is imperative because the components are very small.

Courtesy of BMW OF NORTH AMERICA, INC.

Matrix and handle

Handle
Die-plate

The enclosed operating instructions include instructions for the use of the crimping pliers.

NOTE: Only use the matrix only in combination with one of the two existing handles (83 30 0 494 159 or 80 30 0 496 849) from the tool kits (83 30 0 494 158 or 83 30 0 496 833).

Courtesy of BMW OF NORTH AMERICA, INC.