Crimping annular contacts (all 7' series models 2016-2022)

Special tools required: 

• 61 4 320 

Crimping annular contacts: 

Special tool 61 4 320 

Handling: 

• Refer to Service Information:

  New universal crimping die 

  • Situation: 
    • The variety of contacts and therefore also the various crimping types always require a new crimping tool. To save costs, a universal crimping die was developed. This universal crimping die can crimp a large number of contacts fitted in the vehicles. The wire cross section can vary between 0.35 and 2.5 mm² . Specifications for crimping the individual contacts are always met.
    • The new universal crimping die is used in conjunction with the special tool 61 4 321 (handle without crimping die) and stored in the special tool case 61 4 320.
    • Enclosure 1 : Setup and storage location of the universal crimping die
    • Enclosure 2 : General information about use of the special tool
  • Procedure: 
    • Offer tools will be sent to every dealer with a tools agreement.