Removing the storage shelf with roller sunblind
Precondition
- Adjust rear seat backrest fully to the front.
Preliminary work
- Refer to REMOVING THE CENTRAL SEAT SURFACE .
- Refer to REMOVING THE TWO SEAT SURFACES .
- Refer to REMOVING BOTH C-PILLAR TRIM PANELS .
- Refer to REMOVING BOTH SEAT BELT FINISHER STRIP ELEMENTS .
- Refer to REMOVING THE REAR WINDOW SHELF OF THE COMFORT REAR SEAT .
- Disconnect plug connection (1).NOTE: Perform the steps on the right and left side.
- Loosen screw (2).
- Remove the storage shelf with roller sunblind (3) towards the front.