Install steering wheel

Check the neutral position of the coil spring 

Check 

• Version A: 

  Check the mark (1) on the coil spring in the inspection glass (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» The mark (1) on the coil spring is not visible.

Measure

• Turn the coil spring cassette until the mark (1) on the coil spring visible in the inspection glass (2).

Check 

• Version B: 

  Check the mark (1) on the coil spring in the inspection glass (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» The mark (1) on the coil spring is not visible.

Measure

• Turn the coil spring cassette until the mark (1) on the coil spring visible in the inspection glass (2).

Check 

• Check whether the screw (1) is micro-encapsulated.

Courtesy of BMW OF NORTH AMERICA, INC.

Result 

» The screw (1) is micro-encapsulated.

Measure

• Clean thread in steering column.

  Replace the screw (1).

  Parts:  Screw

• Align mark (1) on steering wheel to mark (2) on steering column.
• Connect steering wheel.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect connectors (1) and lock.
• If installed:

  Connect connectors (2) and lock.

• Tighten down screw (3).

Steering wheel to steering column
M14 Only with microencapsulated screw: Replace screw.	tightening torque	62.5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE AIRBAG UNIT OF THE STEERING WHEEL OR SPORTS STEERING WHEEL .
• Refer to DISCONNECTING ALL BATTERY GROUND LEADS .
• Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .