Install the bottom sensor line for the contactless trunk opening

• Connect plug (1)  .
• Insert the access line into the holder.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the bottom sensor line (1)  into the holder.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Secure the sensor line at the bottom (1)  with the clips (arrows).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE REAR BUMPER COVER .
• Refer to INSTALLING BOTH TRIM PIECES FOR THE EXHAUST TAILPIPE .
• Refer to INSTALLING THE TRIM ON THE REAR BUMPER PANEL .
• Refer to INSTALLING BOTH TAIL LIGHTS ON THE SIDE PANEL .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
• Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL, LEFT .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to ON VERSION WITH COMPACT SPARE WHEEL: INSTALLING THE STORAGE TRAYS .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .