Remove the top sensor line for the contactless trunk opening
Preliminary work
- Refer to REMOVING THE LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to ON VERSION WITH COMPACT SPARE WHEEL: REMOVING THE STORAGE TRAY .
- Refer to REMOVING THE LOADING EDGE TRIM .
- Refer to REMOVING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON LEFT .
- Refer to REMOVING RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .
- Refer to REMOVING BOTH TAIL LIGHTS FROM THE SIDE PANEL .
- Refer to REMOVING THE TRIM FROM THE REAR BUMPER PANEL .
- Refer to REMOVING BOTH EXHAUST TAILPIPE TRIMS .
- Refer to REMOVING REAR BUMPER PANEL .
- Detach the clips on the sensor line, top (1).
- Unlock and disconnect connector (1).
- Feed out the connecting cable from the holder.