Install front cross connection
- Guide in the front cross connection (4) .
- Attach the cable (2) .
- Tighten down screws (1) .
TIGHTENING TORQUE SPECIFICATIONS
| Front cross connection | ||
|---|---|---|
| screw | Tightening torque | 11.8 Nm |
- Replace screws (3)
.
Parts: Screws
- Tighten down screws (3) .
TIGHTENING TORQUE SPECIFICATIONS
| Front-end strut to cross connection | ||
|---|---|---|
| Hexagon screw Replace screw. |
Joining torque | 28 Nm |
| Angle of rotation | 90° | |