Remove resonator
WARNING:
High-voltage system.
The high-voltage system operates on the basis of hazardous, electrical voltage and high currents. Mortal hazard through electric shock!
The high-voltage system operates on the basis of hazardous, electrical voltage and high currents. Mortal hazard through electric shock!
- All work on the high-voltage system may only be carried out by specially trained and technically experienced personnel.
- For additional information see:
- For additional information see:
WARNING:
Hot surfaces.
Risk of burning!
Risk of burning!
- Perform all work only on components that have cooled down.
- Loosen clamp (1).
- Loosen screw (2).
- Unfasten clamp (3).
- Make sure that the holder (6) is not damaged while removing the resonator (4).
- Feed the resonator (4) out of the rubber mount (5) out to the top and remove.