Lowering the engine and detaching the engine bridge

• Turn the special tool (spindle) 2 361 506 (00 6 103) to lower the engine until it is positioned completely flat on the engine mounts.
• Remove the engine bridge with the help from another person.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten screws (1)  on the left and right.

Courtesy of BMW OF NORTH AMERICA, INC.

Installing the lateral hood seals 

• Position the lateral hood seal (2)  at the shock tower.
• Secure the rivet (1)  .

Courtesy of BMW OF NORTH AMERICA, INC.